CAP 10B - the R/C Slow-Flyer, 3-D Trainer kit
	The CAP-10, by Ken Coleman, has been designed to operate on the new 20 g. light Skyhooks MSYS-300TT Brushless Drive or the new 300HT (300XT) Brushless Drive;... and it really operates (the new direct drive motor draws only 4 Amps). The plane, made of Depron foam sheet, has a 25" wingspan and an all up weight of less than 4 -1/2 oz. It flies aerobatically for 10 minutes on 2 Kokam 360 mAh, 20C draw LiPoly cells.
CAP10B R/C SLOW FLYER, 3-D TRAINER. Includes: • Most parts laser-cut Depron foam or balsa.. • Iron-on printed graphics. • Motor mounts for both motors. • Foam wheels with plastic hubs. • Pre-formed landing gear wire. • Plywood control horns. • Molded spinner. • Complete, full size plans	Specifications: Wingspan: 25” Length: 16-1/2” Wing Area: 131 sq. in. Weight: 45 to 50 grams RTF Suggested Equipment Needed • Motor: Sky Hooks & Rigging MSYS-300TT or 300HT (300XT) • Receiver: Sky Hooks & Rigging RX72N. • Sky Hooks & Rigging # SCSH-20BL Brushless Controller. • Battery: 2 or 3 cell Sky Hooks & Rigging Kokam 340-20C S-pack. • Servos: 3 x Bluebird 303 servos. • Your favourite hinging and pushrod systems.
# CAP10B $40.00 each Canadian	Qty:

CAP 10B Complete Package - the R/C Slow-Flyer, 3-D Trainer kit
	The CAP-10, by Ken Coleman, has been designed to operate on the new 26 g. light Skyhooks MSYS-300TT Brushless Drive or the new 300HT (300XT) Brushless Drive;... and it really operates (the new direct drive motor draws only 4 Amps). The plane, made of Depron foam sheet, has a 25" wingspan and an all up weight of less than 4 -1/2 oz. It flies aerobatically for 10 minutes on 2 Kokam 360 mAh, 20C draw LiPoly cells.
CAP10B R/C SLOW FLYER, 3-D TRAINER COMPLETE PACKAGE DEAL. Includes: Parts of laser-cut Depron foam or balsa. Iron-on printed graphics. Motor mounts for both motor types. Foam rubber wheels with plastic hubs. Pre-formed landing gear wire. Plywood control horns. Molded spinner, prop and adaptor. Complete, full size plans 5580 RPM 300TT Outrunner 410g. thrust. SCSH-10BL Brushless Controller Sky Hooks & Rigging RX72N-JST Receiver 3 x BLB303 Bluebird Servos 2-cell 340 mAh, 20C LiPo Battery	Specifications: Wingspan: 25” Length: 16-1/2” Wing Area: 131 sq. in. Weight: 45 to 50 grams RTF Required Equipment: 72 MHz R/C Transmitter Battery Charger capable of charging a 2 or 3-cell LiPo pack at 170 mA.
# PACK-CAP10B $340.00 each Canadian	Qty: Specify Channel Number:

Spare Parts for the CAP-10B Model Kit

Full Sized Plan for CAP-10B Slow Flying 3-D Trainer	# PLAN-CAP10	$10.00 each Canadian	Qty:
Iron-on Graphics Package for CAP-10B	# CAP10-GRAPHIC	$15.00 each Canadian	Qty:
Set of Complete Laser Cut Foam Parts for CAP-10B	# CAP10-FOAM	$15.00 per set Canadian	Qty:

All images are copyright stamped for the protection of the originator

All sales are final unless otherwise stated.

The user must determine the suitability of all items for the intended use and assume all risk and responsibility thereof.

How You Can Reach SKY HOOKS & RIGGING

CAP 10B - the R/C Slow-Flyer, 3-D Trainer kit