Micro R/C Radio Receivers
by Sky Hooks & Rigging
RX72 Receivers
RX72-HYB Receivers with ESC Built In RX72N-HYB Narrow band Receivers w/ESC
The Famous RX72 Receivers
RX72 Specifications
Other Models Available
FCC Compliance
Warrentee Policy
Dealer Enquiries
RX72-HYB Receiver
RX72-HYB Specifications
Other RX72 Receivers Available
Crystals for All RX72 Receivers
RX72N-HYB Receiver
RX72N-HYBRID Specifications
Other RX72 Receivers Available
Crystals for All RX72 Receivers
GWS Narrow band Receivers

The Sub Micro receivers Compared


The RX72 by SKY HOOKS & RIGGING
The WORLD'S LIGHTEST and smallest, 5 channel, fully proportional FM receiver at 1.9 grams.

At 2.8 g. , this JST Model, 4 channel, FM, 72 MHz receiver is perfect for indoor R/C. The RX72 is available on any channel from 11 through 60. These receivers are not custom made and are in stock. Compatible with PPM transmitters: HiTech, Futaba, JR, Multiplex, Airtronics and most other transmitters. Size 1.025" long x 0.525" wide x 0.3" thick.

PRICE INCLUDES CRYSTAL

RX72-JST, F, and PRO Models
$110.00 each USD
$145.00 CAD equivalent
RX72-JST Qty: Specify Channel Number:
RX72-PRO Qty: Specify Channel Number:
To Process Your Order (Check Out)
To Top of Page
Return to Catalogue Index


INDOOR MICRO R/C RECEIVER by SKY HOOKS & RIGGING
specialists in indoor R/C and electric free flight

The SHR-RX72 has the following characteristics:

72 MHz, FM fully proportional
Servo channel functions 4
Available frequency channels 11 through 60
Weight (including antenna, connector sockets and crystal) 2.1 g.
Dimensions 1.025" x 0.525" x 0.3"
Range 1,000 feet
Current Draw 10 mA @ 5 Volts
Operating temperature range 0°C to 100°C
Input Voltage Range 3.5 to 5.5 Volts
RF Input Bandwidth ±76 KHz
Transmitter Compatibility JR, Airtronics, Multiplex, Hitec, and Futaba

OTHER MODELS AVAILABLE

For the purist, looking for extreme lightness, the unit is available without the JST connector sockets. Instead, solder terminals are provided to allow direct connection to servos and speed control. Model SHR-RX72-PRO is a 5-channel receiver, its weight is approximately 1.9 g. (without wires or shrink wrap) and its dimensions are 0.8" x 0.525" x 0.3". Otherwise the PRO has similar specifications to the SHR-RX72. The SHR-RX72-PRO is ideal for helicopter work.

These units are not custom built and are regularly in stock. The retail price of the JST, F, and PRO models of the RX72 is $155.95 Canadian, or about $105.00 in U.S. Dollars.

FCC COMPLIANCE

All of the RX72 series of receivers comply with Part 15 of the FCC Rules of Operation, FCC ID: KH8-T2000.

WARRANTEE

The warrantee policy is simple. If an SHR unit fails to operate, in accordance with its description and design parameters, and provided that the unit has not been tampered with, sustained any physical damage, or been electrically overloaded by the user, it may be returned for replacement by the use of a Return merchandise Authorization Number, obtainable from SKY HOOKS & RIGGING. No merchandise may be returned without an RMA Number. If the unit has failed for any of the reasons mentioned above, it may be repaired at the owner's expense and discretion, by SKY HOOKS & RIGGING.

DEALER ENQUIRIES

Of course, dealer enquiries are welcome. Just contact Tom McCann, of SKY HOOKS & RIGGING, 2206 Towne Blvd., Oakville, Ontario, Canada, Voice 905-257-2101 or Fax 905-257-0168, or e-mail "mi@media-interactive.com" for further information. You might also wish to look at the SKY HOOKS & RIGGING web store at "http://www.indoorrc.com".

To Process Your Order (Check Out)
To Top of Page
Return to Catalogue Index

THE SUB-MICRO RECEIVERS COMPARED

We have tried to get the images as close to proprtionate size as possible.

GWS PICO
GWS NARO
RX72 Series
RX72-HYB Series
RX72N-HYB and RX72N-HYB-V

ATTRIBUTE
GWS PICO
GWS NARO
RX72
RX72-HYB
RX72N-HYB and *RX72N-HYB-V
 72 MHz, FM fully proportional
YES
YES
YES
YES
YES
Narrow band
YES
YES
NO
NO
YES
Specific Band Shift
Must be either Futaba or JR
Must be either Futaba or JR
NO receiver reads signal
NO receiver reads signal
NO receiver reads signal
Speed Controller Built In
NO
NO
NO
YES
YES - Programable except on *
 Servo channel functions
4
4 - 6
4 - 5
4
4
 Available frequency channels
11 thru 60
11 thru 60
11 thru 60
11 thru 60
11 thru 60
 Weight as shown
6.9 g.
9.2 g.
2.4 g
3.5 g
5.4 g
 Lightest version available
6.3 g
8.6 g
1.5 g
2.8 g.
5.1 g.
 Dimensions
1.313" x 0.625" x 0.375"
1.188" x 0.813" x 0.5:
1.025" x 0.525" x 0.3"
0.938" x 0.75" x 0.25"
1" x 1" x 0.375"
 Range on the ground
600 ft.
900 ft.
1,000 ft.
1,000 ft.
1,000 ft.
 Current Draw
5 mA
7 mA
10 mA @ 5 Volts
15 mA @ 5 Volts
10mA @ 5 Volts
 Operating temperature range
0°C to 100°C
0°C to 70°C
0°C to 70°C
 Input Voltage Range
4.8 to 6 Volts
4.8 to 6 Volts
3.5 to 5.5 Volts
6.0 to 10.5 Volts
15 Volts See *
 RF Input Bandwidth
 ±76 KHz
±76 KHz
±10 KHz
 Transmitter Compatibility PPM
Futaba, Hitec, JR
Futaba, Hitec, JR
 JR, Airtronics, Multiplex, Futaba, Hitec
JR, Futaba, Hitec
JR, Futaba, Hitec
Wiring Harness Included
NO
NO
NO
YES
YES
Servo Adaptor Plugs Included
NO
NO
YES
YES
YES
 Price with crystal U.S. $
$45.00 USD
$50.00 USD
$110.00 USD
$140.00 USD
$159.00 USD
 Price with crystal CAD equivalent
$60.00 CAD equivalent
$65.00 CAD equivalent
 $ 145.00 CAD equivalent
$185.00 CAD equivalent
$210.00 CAD equivalent
 Other models available
NO
Also available as a 6 channel receiver by special order.
SHR-RX72-PRO is smaller snd lighter with no sockets, 5 channels, 1.9 g
Several models are available for use with lithium metal cells and for low voltage operation, as follows:

RX72-HYB for use with NiCd batteries.

RX72-HYB-0 for use when no cut off is required.

RX72-HYB-L6 for use with 6 Volt lithium packs.

RX72-HYB-L9 for us ewith 9V lithium packs.

RX72-HYB-L12 for use with 12V lithium packs.

* There is a second model available that has been designed specifically for low Vlltage operation with a minimum of 3 Volts. The low voltage version will not operate above 5.1 Volts.

No other models need be produced for lithium cell operation, as ESC on regular version is programmable.

Comes complete with:
Receiver
Instructions
Wiring harness
Crystal
Adapter plugs for servos, battery, charger and motor.
 Comments Good quality receiver provided that you declare a fixed transmitter before purchase. Has been found to have good performance outdoor, but is a little heavy for indoor work. Good quality ,ong range receiver provided that you declare a fixed transmitter before purchase. Has been found to have good performance outdoor, but is a little heavy for indoor work.

Excellent for work with Speed 280 and Speed 400 applications due to the increased range.

This product is ideal for indoor scale and slow flying as well as for Backyard and Park Flyer work. Excellent where ultra light weight is needed. The inclusion of the ESC on the receiver curcuit board affords a weight saving that cannot be paralleled. The special wiring harness makes this unit a plug and play product. Very versatile for indoor applications.

User must declare transmitter because of location of throttle in the pulse stream. The receiver does not care which band shift is used at the transmitter. It reads the signal and adjusts accordingly.

The inclusion of the programmable ESC on the receiver curcuit board affords a weight saving that cannot be paralleled. This also provides for use with a number of battery combinations that previousle required different receiver models to satisfy. The receiver does not care which band shift is used at the transmitter. It reads the signal and adjusts accordingly. The special wiring harness makes this unit a plug and play product. The mosty versatile wide band receiver available for indoor and outdoor applications.
To Process Your Order (Check Out)
To Top of Page
Return to Catalogue Index

SKY HOOKS & RIGGING | TO PROCESS YOUR ORDER


Copyright © Sky Hooks & Rigging. All rights reserved.

All images are copyright stamped for the protection of the originator

All sales are final unless otherwise stated.

The user must determine the suitability of all items for the intended use and assume all risk and responsibility thereof.


How You Can Reach SKY HOOKS & RIGGING

2206 Towne Blvd., Oakville, ON Canada L6H 5H4
 
Voice 905-257-2101
Fax 905-257-0168
E-mail info@skyhooks.ca
Web www.skyhooks.ca