![]() |
|
![]() |
17 g. |
|
|
![]() |
21 g. |
|
|
![]() |
21 g. |
|
|
![]() |
20 g. |
|
|
![]() |
10 g |
|
|
![]() |
1.9 g. |
|
|
![]() |
1.2 g |
|
|
![]() |
0.8 g |
|
|
Coreless Motor Performance Specs
| MNC-524 | MNC-1331 | DC1524 | DC1624 | DC1717 | DC1724SR | DC1.3-0.04 | DC1.3-0.03 | DC1.3-0.02 | |
| Rated Volts | 5 | 4.5 | 3 | 3 | 3 | 3 | 1.3 | 1.3 | 1.3 |
| No Load current mA | 35 | 35 | 47 | 30 | 65 | 43 | 40 | 65 | 37 |
| No Load Speed RPM | 21,000 | 10,800 | 10,800 | 12,000 | 12,600 | 8,200 | 14,000 | 6,000 | 27,000 |
| Stall Torque g-cm | 44.8 | 78.6 | 47 | 43.3 | 39.7 | 47 | 1.2 | 1.2 | 0.3 |
| Max Output Power Watts | 2.42 | 2.22 | 1.92 | 1.36 | 2.1 | 2.89 | 0.04 | 0.03 | 0.03 |
| Max Efficiency % | 75.3 | 77 | 77 | 78 | 72 | 81 | 32 | 29 | 19 |
| Weight g | 10 | 20 | 21 | 21 | 17.5 | 26 | 1.9 | 1.2 | 0.8 |
| Diameter and Length mm | 12 x 17.9 | 13 x 31 | 15 x 24 | 16 x 24 | 17 x 17 | 17 x 24 | 6 x 15.2 | 6 x 12 | 4.8 x 4.2 x 10.9 |
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
$8.50 each Canadian
|
|
![]() |
|
$8.50 each Canadian
|
|
![]() |
|
$8.50 each Canadian
|
|
![]() |
|
|
|
| MNC-4S-10 | MNC-4S-24 | MNC-4-10 | MNC-4-40 | MNC-4L-10 | MNC-4L-40 | MNC-6S-10 | MNC-6S-30 | MNC-6-10 | MNC-6-3 | MNC-6L-10 | MNC-6-8 | MNC-6-85 | MNC-7-10 | |
| Rated Volts | 1.2 | 3.0 | 1.2 | 03. | 1.2 | 2.4 | 1.2 | 2.4 | 1.2 | 0.8 | 1.2 | 0.8 | 0.8 | 1.2 |
| Motor Resistance in Ohms | 10 | 24 | 13 | 40 | 10 | 40 | 10 | 30 | 10 | 3 | 10 | 8 | 8.5 | 10 |
| Weight g | 0.46 | 0.46 | 0.70 | 0.70 | 0.70 | 0.70 | 1.3 | 1.3 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 2.3 |
| Output Shaft Dia. in mm | 0.60 | 0.60 | 0.70 | 0.70 | 0.70 | 0.70 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 1.00 |
| Diameter and Length mm | 4 x 8 | 4 x 8 | 4 x 11 | 4 x 11 | 4 x 14 | 4 x 14 | 6 x 10 | 6 x 10 | 6 x 12 | 6 x 12 | 6 x 15 | 6 x 15 | 6 x 15 | 7 x 17 |
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
|
![]() |
|
|
The low-cost propulsion alternative for small RC-Slow-Flyers:In addition to many different applications in small models two parallel driven N20 and M-20 motors are suitable to drive a small RC-Slow Flyer direct drive or geared.
![]() |
|
|
|
|
![]() |
|
|
|
|
|
|
5.3 g |
|
|
|
![]() |
5.3 g |
|
|
|
![]() |
5.3 g |
|
|
|
![]() |
2.4 g |
|
|
|
Conventional WES Technik Cored Motor Specs
| M4.5-0.6 | M4.5-0.5 | M4.5-0.4 | M3-0.15 | |
| Nominal Volts | 4.5 | 4.5 | 4.5 | 3 |
| No Load Current mA | 46 | 44 | 50 | 100 |
|
Loaded Current mA
|
|
|
|
|
| No Load Speed RPM | 21,178 | 20,700 | 16,850 | 22,000 |
| Loaded Speed RPM | 18,300 | 17,520 | 12,900 | 14,200 |
| Torque g-cm | 3 | 3 | 3 | 1 |
| Max Output Power Watts | 0.58 | 0.53 | 0.4 | 0.15 |
| Max Efficiency % | 62 | 61 | 54 | 31 |
| Weight g | 5 | 5 | 5 | 2.4 |
| Shaft Diameter mm | 1 | 1 | 1 | 1 |
| Diameter and Length mm | 12 x 10 x 15 | 12 x 10 x 15 | 12 x 10 x 15 | 10 x 8 x 11.5 |
SKY HOOKS & RIGGING | TO PROCESS YOUR ORDER
Copyright © Sky Hooks & Riggong 1999 . All rights reserved.
All images are copyright stamped for the protection of the originator
All sales are final unless otherwise stated.
The user must determine the suitability of all items for the intended use and assume all risk and responsibility thereof.